Screwdriver-rack (Paramateric, CadQuery, PB-Swiss)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully parametric screwdriver-rack made with python and jupyter-cadquery.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 450
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Fully parametric design made with jupyter-cadquery. Find the code on github: https://github.com/tdamsma/Screwdriver-rack
With just the shaft and handle diameters you should be able to adjust this design to pretty much any set of screwdrivers. I used wooden legs (15mm diameter, scavenged from an obsolete Ikea wine rack). As the final design does not fit my printer, I split it in two with a dovetail joint. I printed it without supports (except on the dovetail joint), no infill and no top layer using a 0.6mm nozzle. The dovetail ended up having a bit more play than I would have liked, I would use a 0.1mm gap instead of 0.2mm if I were to print it again