1 / 4
Ender 3 v2 - Bed Mount for Sexbolt and silicone brush mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sexbolt mount and additional silicone brush mount.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 792
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (30)Powiązane
Befor you begin, these bed leveling thumb nuts are required:
https://github.com/boubounokefalos/Ender_SW/blob/main/STLS/Gantry/Y%20Axis/%5Ba%5D_thumb_nut_x4.stl
Instruction
- Insert the M3 nuts into the open holes (Image 3)
- Insert the M3x18 screws into the brush mount and screw them into the nuts.
- Insert the M3x20 screws into the Sexbolt mount and screw them into the nuts.
- Loosen the screws to adjust the height.
BOM:
- 4x M3 nuts
- 2x M3x18 (Brush mount)
- 2x M3x20 (Sexbolt mount)
I used a basic silicone brush and cut it:
Printed with PETG