Ferrari SF70H Steering Wheel for simracing Hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Complete F1 Steering wheel fot simracing use on F1 games like Assetto Corsa, based on real Ferrari SF70H steering wheel
- Ocena
- 0 / 5
- Polubienia
- 112
- Pobrania
- 730
- Wydruki
- 0
- Wyświetlenia
- 6645
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
*DISCLAIMER: This is a Work In Progress Project, so STL or code and program can change, also it is a complex build for expert thinkerers. I'm actually doing some universitary exams, so I have a little time to work on the project, but if you want to buy me a cup of coffe or buy new electronic components here is my Paypal wallet :-) paypal.me/simoneklinkon
Steering wheel for professional or home-built simulators for formula one cars and simracing in general
Based on an SLI-Bodnar F1 and a USBD480 display, this steering wheel allows you to obtain a better simulation realism on advanced simulators, it is also equipped with a vast set of inputs such as potentiometers, switches and buttons in order to make the management of the vehicle complete during the simulation experience. the project is still a work in progress, over time I will upload all the files necessary for the assembly, the .STEP files for Fusion360, the schematics for the electronics and a BOM complete with screws and mechanical parts required. Currently it is printed in PETG, but it is preferable to print it at least in ASA to make it more resistant to shocks and mechanical stress
UPDATE OF 24/11/2021
- Uploaded new Mainframe.stl in single piece for major resistance
UPDATE OF 31/08/2021
- Uploaded Gcodes for frame assembly, currently optimizing clutch and shifter ones
UPDATE OF 30/08/2021
I finally complete the first build, so now I can correct some tolerances on some STL like mainframe for using BBI-12 rotary switches. I also uploaded the DXF file for the clear plexiglass cover for the USBD480 display. I'm actually doing some universitary exams, so I have a little time to work on the project.
Next goals of the project:
- Correct all the tolerances
- Complete the electronics
- Change Clutch assembly with a new system for using an external arduino
- Design a 8pin_connector for all the external wiring to put them inside the quick release system
- Write an Italian and English assembly guide
UPDATE OF 15/08/2021
- Added Front panel for buttons and thumbwheel mounting
UPDATE OF 09/08/2021
- Added Clutch and Shifters Files and Electronic equipment as Knob and Thumbwheels