1 / 1
My MPCNC Mods
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collection of my mods for the mpcnc primo F-25mm
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 1011
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (24)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (25)Powiązane
All of my mods for my mpcnc primo F-25mm.
STLs are oriented for printing. Everything prints without supports, except a few parts. Please refer to the description below and/or the included gcode.
XY Endstops
Hardware needed:
- 2x M3x5x6 heatset insert, or shorter, should also work. For example, M3x5x3 should be fine
- 1x M3x12
- 1x M3x45
Z Endstop
Hardware needed:
- 2x M3 Self Tapping Screws
- 1x Microswitch
Corner Braces
Print with supports!
Hardware needed:
- 15x M5x20
- 15x M5 Locknuts
- 20x Screws for mounting on the table (I used DIN 7981)
Nema 17 Drag Chain Mount with 2 Channel Relais (Gantry)
Hardware needed:
- 2x M3x10 and M3 Nuts for mounting the drag chain
- 3x M3x10 and M3 Nuts for mounting the relais pcb
- 1x M5x30
- 1x M5 Locknut
Router Probe
Hardware needed:
- 8x 6x3 magnets, conductive (most are)
- (Optional) Glue for securing the magnets in place
- 1x Wire
- 1x Touchplate … or quick and dirty solder a wire to a blank PCB and use that ;)
Assembly:
- Press first 4 magnets in
- Insert striped wire and loop it over all magnets
- Insert last 4 magnets and press them flush
MKS PI Detachable Case (with TS35 Screen)
Hardware needed:
- 12x M3x5x4 Heatset Inserts
- 10x M3x10
- 2x M3x4
- 4x 6x3 magnets, conductive (most are)
- (Optional) Glue for securing the magnets in place
- (Optional) 4x DIN 7981 Screws
Version History
21.01.2024 Initial Version
22.01.2024 Added Z Endstop
26.01.2024 Added Router Probe
27.01.2014 Oriented all stl and added gcode with all mods
20.02.2014 Added MKS PI Detachable Case