T430 IO/HDD Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- GNU General Public License v3.0
I made this model because I had a Lenovo T430 that was missing the IO cover. It was missing the screw for it too, so I designed this model to not require a screw when mounting. (This is only for the mk1, mk2 requires a screw) It clips onto the preexisting mounting points on the laptop, so it shouldn't come free easily.
This model is designed to be printed with a 0.4mm nozzle at 0.3mm layer height, but it should work with smaller layer heights as well. (mk2 is designed for 0.2mm)
EDIT: I remodelled this from scratch because the last version I made for mk1 (v1.8) still didn't fit well. The remodelled ones are labelled mk2.
The mk2 v3 is the one I printed, and mk2 v4 is the untested one I've made changes to based on the slight (insignificant) problems with mk2 v3.