Altoid Divider Insert Parametric

THE POSTED 3D FILES HAVE A TIGHT FIT FOR ALTOID TINS AS IT WAS DESIGNED FOR A TIN JUST SLIGHTLY LARGER THAN THEM

If you want to use them in Altoid brand tins scale it down just a bit (around 1~0.5mm depending on how loos you would like it to be. If you like the fit but don't like it pressing on the lid remove about 1mm from its height.

The point is you can customize the divider to your liking, I made it a tight fit, because I dislike the organizer raddling around in the tins. 

This is made for all brands of tins shaped like Altoid tins, with just a bit of work. This parametric version is designed to let you add as many horizontal and vertical dividers as you want. You can even offset them individually to one side or the other ( as a group, the distance between dividers going the same was will remain the same).

Even id you want something more specific this model can be a good starting point, letting you adjust the fit inside of the tin with ease before adding your own flare.

Additionally, I added the ability to make stencils, this was a near afterthought but some are provided and you can control most of the dimensions independent from the organizer. It is setup such that once you have your divider dialed in it is easy to add some extra thickness and have the lines mostly line up with the divider itself.

Here is the link to the Onshape document:

https://cad.onshape.com/documents/bbc1f0ffe44c6c35a91d620a/w/ec89942d7ce9ddbc55c68fe9/e/485217c5fb762b5619811439?renderMode=0&uiState=65acc08a6a47b87c7c4a4031 

The posted 3d files are designed for these tins:

https://www.amazon.com/dp/B07LG599QK?ref=ppx_yo2ov_dt_b_product_details&th=1 

I linked the black look of them, and hadn't found a flavor of Altoids that I was going to go through fast.