1 / 5
Showcase / Cabinet for the presentation of cameras and watches — zdjęcie 1
1 / 5

Showcase / Cabinet for the presentation of cameras and watches

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cabinet for dust protection of valuable gear like Leica cameras.

Ocena
0 / 5
Polubienia
12
Pobrania
42
Wydruki
0
Wyświetlenia
433
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

Housing of the showcase is 3D printed in one piece. The acrylic pane is pulled against the surrounding seal with 2 magnets. 

Inside the showcase, dimmable LED lighting can be installed. For this purpose, the cable can be routed downwards or to the rear out of the housing via a cable duct integrated in the housing. Alternatively, a power bank up to 14mm high can be inserted in an integrated compartment below the showcase. 

I designed the display case for storing my Leica cameras, as they are always dusty in my usual display case. Of course, it can also be used for other presentation objects.

Dimensions:
Outside: 234 mm (w) x 202 mm (h) x 179.6 mm (t)
Inside: 226 mm (w) x 176.5 mm (h) x 161.5 mm (d)
Display table inside the showcase : 140mm (b) x 120mm (t)

Door: 217mm x 161.3 mm

Tagi