Airbrush holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple yet effective holder for the most common airbrush and airbrush compressors out there.The diameter for…
- Ocena
- 4,846 / 5
- Polubienia
- 150
- Pobrania
- 851
- Wydruki
- 15
- Wyświetlenia
- 5477
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a simple yet effective holder for the most common airbrush and airbrush compressors out there.The diameter for the attachement point to your compressor is 30,5 mm.
If you like this model consider becoming a Patreon: https://www.patreon.com/WF3Dprinting
You can see the video about th eholder right here: https://youtu.be/S3uulnb_zt8
Please check the drawing for the most important measurements to check if the holder will fit to your airbrush and compressor.
Print instructions
Licence: Creative Commons - Attribution - Non-Commercial - No Derivatives Category: Tool Holders & Boxes Print Settings
Resolution: Doesn't Matter
Infill: 30% or more
Filament: Any ABS, PETG recommended
Notes:
I printed it in PLA and it worked well so far. But ABS or PETG is recommended due to thermal resistance