Ikea Hemnes Shoe Cabinet foot - rectangular design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original part of TNI with id 3436694 was quite good, but I do not like that design.
So my step son designed a new "rectangular" one.
We are happy now with this design - it fits better to the design of the Hemnes cabinet.
This foot has a base plate of 2,8mm as the original round plastic buffer has (see picture).
So it can be replaced easily by the new cabinet foot without changing the screw wholes in the wall.
The walls of the foot are kept as small as possible and it fits very tight. Maybe you have to remove the swollen wood.
We printed it with a 0.6mm nozzle and 0.2 layer height and 30% infill.
We also used brim with 4 lines to keep the object on the heated glass.
Print Settings
Printer:
Sunlu S8plus
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament:
Extrudr PLAwhite
Category: Replacement Parts