Bi-Material Xiaomi Roborock Side Brush
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bi-material (hard case + soft legs) side brush replacement for Xiaomi Roborock vacuums.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 547
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my take on making a side brush replacement for Xiaomi Roborock vacuums. I'm only using it on hard floors so I do not know how well it'll perform on rugs.
Print the case with PLA, ideally using the “with sacrificial layer” (no support) variant with .2mm layer height and this orientation:
Print the legs with TPU and .2mm layer height. The hub can have sparse infill but make sure the legs themselves have 100% infill:
Take the hard case and punch through the sacrificial layer with a screw driver where the screw typically goes and then simply push the legs into the case.
I modeled two holes in the case (and legs) for M2.2 grub screws however it seems that friction fitting is good enough so I never had to use them.
