1 / 1
Wallmount for NUC12WSH
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wallmount for Intel NUC12WSH and similar NUCs
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The existing wallmounts available for NUCs did not fit my NUC12WSH with the screws that were provided with the NUC. As I am currently also learning FreeCAD, I decided to built my own…
- Add the two screws for mounting the NUC to a VESA mount into the bottom. The screws are part of the screw set supplied in the NUC box (at least that was the case for mine).
- Mount the printed plate to the wall
- Slide the NUC into place
I printed the wallmount with 25% infill and PETG. I also did not use all four screw holes, but used only the two outer ones. So far, it is rock solid. Your milage may vary…