1 / 5
PSOC6 Wi-Fi BT PROTOTYPING KIT (CY8CPROTO-062-4343W) | Case/Container — zdjęcie 1
1 / 5

PSOC6 Wi-Fi BT PROTOTYPING KIT (CY8CPROTO-062-4343W) | Case/Container

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A protective Case for a PSOC6 Wi-Fi BT PROTOTYPING KIT

Ocena
0 / 5
Polubienia
0
Pobrania
19
Wydruki
0
Wyświetlenia
163
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I could not find a printable STL file to protect my PSOC6 Wi-Fi BT PROTOTYPING KIT (CY8CPROTO-062-4343W) board I use for school. 
I did in fact found this website were someone makes the case I provide here, but this person didn't provide an STL so I could print it (or I'm just stupid to not find) so I drew it myself. 

In the photos of the printed version my name is also ingraved but I let that out of the files I provides here. 
I also had to sand a lot of my model because my nimensions wern't so great…
It should fit normal now because I edited it… (but I'm not sure).
You may also notice that the printed model says …062-4342W… It must be …-062-4343W… 
This is also eddited to be a 3 instead of a 2!

Upgrades I would do but I don't do them now because I already have a case:

  • Remove the handle because it's to small to grab.
  • Make it that the PSOC can stay the slide compartment that. Cut holes in front of the Micro usb ports on the board that the cable can be connected.

     

Tagi