IKEA Samla mount on a miditower: Phanteks P400
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to put an IKEA Samla 22L on top of your computer case. The file is parametric in Fusion 360 so you can adapt it!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Hello!
This model is for a stand to put your favorite IKEA Samla 22l box on top of your computer case. There is a parametric F360 file so you can make it suit your needs. The parameters for the computer case are marked as favourites in F360.
The mount is very sturdy and most likely the computer case will sag before the print parts do. I am not the least worried about it falling, as it sits very securely on top of the case.
Air flow to the top vents is not hindered with this design. If you as I do have one fan to pull air into and the other as an exhaust fan, the cooling will likely improve with the middle base as it hampers air re-circulation between the two fans.
I made the cutouts to make it look nicer and improve air flow front and back.
Included among the files is a folder with the mentioned F360-file as well as a STEP-file for the whole model. In it you will also find a tool to create your own cutouts for the Samla feet if you would like to for any other project.
Print one of each of the files found in root folder below. Print the bases top-down to avoid overhangs in the Samla foot cutouts.
Post-processing: None, no glue required.
I printed with:
PETG
3 Perimeters and 4/4 top/bottom
13% Adaptive Cubic infill
0.2mm layer height
No supports
MidBase printed with Lightning Infill as it does not hold any weight.
Enjoy and let me know what you think!