1 / 1
Flywoo Firefly 1S Nano Baby Pod for HDZero Nano V3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated pod designed to fit the HDZero Nano V3 camera.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 890
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
I updated my quad with the new HDZero Nano V3 camera. This camera has the same 14mm mounting as the original Nano Lite camera, but the lens is a little bigger. I made this pod to accommodate the larger lens.
There is a small bit of vignetting around the corners of the 4x3 image, but it isn't really noticeable when flying.
Printed with SainSmart 95A TPU. 100% infill. Organic supports at 35º.