Prusa XL Dwarf cover door with a channel for an Allen key
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Dwarf cover door that allows for idler tension adjustment without taking it off
- Ocena
- 4,889 / 5
- Polubienia
- 27
- Pobrania
- 173
- Wydruki
- 7
- Wyświetlenia
- 1098
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Useful when changing idler tension often, e.g. when you switch between rigid and flexible filaments.
The channel might push on the heater cable a bit, but should not cause any major strain. It is angled (narrow opening hole and wider exit) to leave as much room as possbile inside for the cable.
An Allen key with a ball end will be required due to the angle of the right screw (although the plain one might work too, but I have not tested it).
Print with any material of your choice with 0.4 mm nozzle at 0.2 mm layer height.
Print as oriented - i.e. on the “smaller” surface, with both holes horizontally.
You apply any mods and non stock parts at your own risk.