Reusable Voronoi Scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a fun take on the scraper we all know and love, but with a twist. Don't worry, it's still... Voronoi galore?
- Ocena
- 4,5 / 5
- Polubienia
- 12
- Pobrania
- 93
- Wydruki
- 3
- Wyświetlenia
- 835
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've been using the Reusable Hex Scraper for several months now and just saw the new Moroni flash contest. I thought the scraper would be a perfect fit to be voronoied, so I did just that!
Just as my previous model, I've included both STEP and STL files of the scraper since I like having options.
.
I made two different versions of the the blade, a normal one (similar to the one seen in the reusable Hex Scraper) and a Voronoied one. From my testing, both blades work fine for normal use!
.
Print Instructions:
Filament: PLA, PETG (I used PETG)
Layer Height: 0.2mm (or lower if desired)
Nozzle: 0.4mm
Support: None
Brim: None
Infill: 15% (can do more, but I wouldn't go below 15%)
Additional Notes:
- Blade:
- Normal Orientation
- Sizing: 100% on X1C, may need to do 99%, 101% or 102% if using other printers/materials
- Body:
- Due to overhangs, make sure to print the scraper body upside down
- Sizing: 100%