1 / 2
Spacer for 19mm FPV Camera to fit into a 20mm mount — zdjęcie 1
1 / 2

Spacer for 19mm FPV Camera to fit into a 20mm mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just a simple spacer to mount a 19mm FPV camera into a 20mm mount. I use it with a Walksnail HD Pro Kit in a AOS5…

Ocena
0 / 5
Polubienia
2
Pobrania
50
Wydruki
0
Wyświetlenia
273
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Just a simple spacer to mount a 19mm FPV camera into a 20mm mount. I use it with a Walksnail HD Pro Kit in a AOS5 frame.

The spacer is 0,6mm thick and might need to be sanded down if too if your printer isn't calibrated perfectly.

The thin handle is for positioning the spacer without completely disassembling the camera cage. Once in place they can be folded once and ripped off easily.

Print Settings

Printer Brand:

Sovol 3D

Printer:

Sovol SV05

Rafts:

No

Supports:

No

Resolution:

0,2

Infill:

100%

Filament: Extruder PLA, PETG,..... black

Category: R/C Vehicles

Tagi