embroidery bow
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It was made to hold embroidery floss, without unwinding it onto a bobble.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 349
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
this is an embroidery floss holder, its like a bobbin but much much much faster!! a bobbin you have to wind it around which takes time with the bow you just bend it and slip the thread over. its a great print for the end ov the spool too.
print settings/info
time: 15 ish minutes or something
filament:3-4ish grams when printed with 3 walls and 15% infill
supports: no
layer level: .2mm
brim: no unless you like using them or have bad bed adhesion
speed: however fast your printer can handle. but…..
… plz use reason
have fun printing and I hope this helps.
any feedback would be welcome.