1 / 2
Better Traxxas 2WD Magnum 272 Transmission (Requires RPM Gearbox Parts) — zdjęcie 1
1 / 2

Better Traxxas 2WD Magnum 272 Transmission (Requires RPM Gearbox Parts)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Better Traxxas 2WD Magnum 272 Transmission (Requires RPM Gearbox Parts)

Ocena
0 / 5
Polubienia
5
Pobrania
80
Wydruki
0
Wyświetlenia
971
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

PLEASE NOTE: YOU MUST HAVE THE RPM GEARBOX IN ORDER FOR THIS TO WORK, THE METAL MOUNT AND A-ARM ATTACHMENTS ARE NEEDED FROM IT

I needed a much bigger motor mount for my Rustler 2WD, so I remodeled a RPM gearbox without the cover mount/wheelie bar mount to accommodate huge motors.

It's snug, but I can fit a Castle 1717 1650kv motor in there with 18/47 mod 1 gearing (planning on installing taller gearing soon), I'm also planning to run it on 8S which is completely overkill, but I really want to make a custom 3D printed chassis too.

This isn't anywhere close to being final. I want to find a way to add the wheelie bar back without interfering with the huge motor. I posted this now because the gears, bearings, and extra bits fit and spin perfectly. I'm posting Solidworks files so anyone can edit/add their own thing.

Supports are needed everywhere except the holes, and print upright. The L transmission case cannot print face down, so it needs to be printed standing up, with lots of support. I should've made this more 3D-printable, but that's to come in future versions which I am planning to do, since I want to make an 8S rustler.

Notes:
Any driveshaft cup diameter 11.5mm or lower will fit (MIP driveshafts work perfectly, I have them installed)
This upgrade is intended for cars with the original Magnum 272 transmission (non-R) with the RPM gearbox upgrade.

Print Settings

Printer Brand:

Prusa

 

Printer: 

i3 MK3

Rafts:

 

No

 

Supports: 

Yes

Resolution:

 

0.2

 

Infill: 

25%, Rectilinear


Filament:

any PETG, PC, anything temperature resistant >100C 

 

 

 

 

Category: R/C Vehicles

Tagi