Card Holder - Various Games and Sizes - Identical Halves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Maximizes card corner and edge protection, while minimizing filament usage, and being super easy to print.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 181
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
There are other card holders out there, but I wanted something a little different. Based on the following design needs:
- Configurable (At least in OnShape - free account to edit)
- Set the variables for the deck dimensions, and go.
- Also can configure wall thickness, clip thickness and height, printer tolerance, and more. This is helpful for tuning for different materials.
- Same part for both halves, just print it twice.
- Thin and light.
- Corners and edges completely protected. Toss in a bag and don't worry.
- But also open front so we can see what the game is.
- Safe and easy for kids. (not sure I've nailed the easy part, time will tell)
Access the model to configure (or remix) to your heart's content here: https://cad.onshape.com/documents/11771f84be18df1f5c68f88e/v/2b0530bcf8169385d0fe29dc/e/f5adecb30a29c9a309bd9353?renderMode=0&uiState=65a717a8e8245643a49de0c1
I do recommend printing in PETG, as that's what I have tuned the clips for. PLA may snap rather than flex. If you try it, please let me know your results.
I have uploaded a few sizes and shapes. If you need something different and are too lazy to do it at the OnShape link above on your own, let me know the size in mm of your deck and the name of the game and I'll do my best.
Print Settings
Rafts:
No
Supports:
No
Infill:
N/A
Filament:
Category: Toy & Game Accessories