Sidewinder X1 Dial Indicator Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for a dial gauge held in place by a press fit. This goes in place of the stock fan while leveling.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 936
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A dial indicator mount for the Sidewinder X1. Remove the part cooling fan and screw this into place using the same screws. The dial indicator is intended to be a tight press fit into the mount to keep it in place. I use it with a Clockwise Tools dial indicator which has a 9.5mm diameter stem.
This places the needle 30mm forward inline with the nozzle.
When leveling I use this at the 4 corner leveling positions first to set them all to the same depth.
Next I do a 5x5 mesh. When making the mesh once the printer moves to each location you can manually send G0 GCode commands to move the print head 30mm back on the Y Axis and then begin adjusting Z height for that point.