Toilet paper roll adjustable spindle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this as a replacement for a spindle that was broken. Both pieces were printed with the open falt side down,…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Designed this as a replacement for a spindle that was broken.
Both pieces were printed with the open falt side down, the tiny nipple is facing upwards.
Printed at 0.20 Speed setting from Prusa Slicer, 15% infill, no support needed.
The spring is the old one from the broken spindle.
SPINDLE MINIMUM LENGTH 116mm - MAXIMUM LENGTH 146mm. Any measure between theese two is good for this design.
Print Settings
Printer Brand:
Prusa
Printer:
Mini+
Rafts:
No
Supports:
No
Resolution:
200
Infill:
15
Filament:
[
Enotepad PLA ](http://www.amazon.com/s?url=search-alias&field-keywords=Enotepad+PLA&tag=thingiverse09-20) Grey Post-Printing
Category: Bathroom