Over Engineered HOTO screwdriver case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a HOTO screwdriver case with leaf springs for the hex bits, the current design is kind of lose for ease of acces
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a HOTO screwdriver case with leaf springs for the hex bits, the current design is kind of lose for ease of access, let me know if you'd like a version with a stiffer spring, PLA works (short term at least) but i'd recommend PETG! Mine is printed out of PA-CF. the version I uploaded has more rows and columns for driver in case you'd want more, i only test printed a section of this new model to test the bits fitting in, the version I printed in the photo (With stiffer leaf springs etc) is also uploaded!
if you don't want to waste filament, please try the test part first!
needs 4 8x2mm(2.5mm) magnets!
EDIT: just as a warning two issues I found are
- if you don't point the button up it gets pressed in the case and spins
- the tolerances are too tight which makes the screwdriver hard to insert.