Elegoo Neptune 4 Plus Accelerometer Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket to offset the accelerometer on the Neptune 4 Plus when installing the TBStron3D Y rail linear kit.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 2502
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
A very simple bracket for the Neptune 4 Plus to offset the accelerometer when installing the TBStron3D Y axis linear rail kit.
The accelerometer will rub against the linear rail and mount creating pressure on the rail and bed bracket. The accelerometer mounts to the smaller diameter holes and self taps.
Print details:
- PLA
- 10 walls (can set to anything, I did print with 3 and it worked fine)
- default 15% gyroid infill
Uses 4x M3x8mm hex head bolts.
The accelerometer is mounted with some m3 screws already, replaced those with 2x M3x8mm screw.
Like I said, this is extremely basic, but just uploading it to save others the time of messing around etc. TBStron3D are aware and are going to start including brackets anyway.