1 / 7
Watering spikes for 6 mm OD piping, bending up or down — zdjęcie 1
1 / 7

Watering spikes for 6 mm OD piping, bending up or down

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Four different lengths, five different angles. Prints on MK3S+

Ocena
0 / 5
Polubienia
8
Pobrania
47
Wydruki
2
Wyświetlenia
458
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

I needed spikes to hold spray mister pointing down to water my bonsai trees.

The spike comprises (1) a stem providing height and (2) a spike with holder that pushes into the pot/soil. There are different stems, all fitting in the same spike.

Different stem lengths are available 50, 130, 210 and 290 mm above ground level.

Different bend angles from down to up are available -110, -50, 0, 50, 110 degrees relative to horizon. This allows the sprayer to point in many different directions.

Design is done in cadquery, you can create new angles or stem lengths as you wish.

The sprayer is here https://www.printables.com/model/730057

Tagi