OurPlace Always Pan Hangers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a way to hang the OurPlace pans. Looks like there's enough 4mm bolt to make our own!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This was a quick handle attachment I made for the OurPlace Always Pan series. Most of their Always pan series are designed for stove top - not in the oven as the handle is made of a separate material. With a long 4mm metric hex key you can easily take the handle off, push this hook attachment on, feed the bolt back through the top and tighten gently to secure. In the pictures are both the Mini Always Pan and the Standard Always Pan. The sizing fits for both with the v1 and the v1 extended having a slightly ‘tighter’ fit. v2 has more variations in grooves to make it more comfortable to grab while cooking where as v1 has an abrupt edge.
My goal for this was to design it under 30 minutes - came in right at the 25 minute mark with a few minutes to print!
I printed it flat so the print structure would align for a stronger print. I suggest you print it this way as well as if you print it vertically stacked you run a serious risk of the failure point (where the bolt feeds in) will layer separate given the weight of the pan.