Ender 3 - Tyfo's flexible extruder with fitting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Solution to Ender 3 ever failing pneumatic fitting, also makes it easy to print TPU on factory extruder.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This remixed model presents two benefits that original one does not have:
- stops the PTFE tube from slipping out when tightened properly;
- the inner lip/cone/spike at the gear side makes it way easier to print TPU as the “noodle” does not escape to a side;
Printing tips that worked for me:
Extruder part: lay flat as it is, print with supports (it's a pain, I know, but it's doable AND worth it), use the tiny wrench supplied with the printer to tighten thee nut;
The nut: print as is (i.e. thread up).
Mine were printed in PLA initially and there were no issues with it, however at some point I moved all my 3D printed parts to ASA which obviously worked exactly the same but in theory was less prone to temperature deformation.