Portabatterie 18650 - 18650 battery holder pocket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scatola porta batterie 18650 - 18650 battery box
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 262
- Wydruki
- 1
- Wyświetlenia
- 1087
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Scatola porta batterie 18650 per 2 posti per trasportare in sicurezza 2 batterie di ricambio in tasca. E' stato stampato con tolleranze per un altezza layer 0.2 e larghezza 0.44. E' stampato in un unico pezzo ed il modo migliore per darlo in pasto allo slicer è poggiarlo dal lato piatto, aggiungendo i supporti solo dove ha la cerniera per piegarsi. Inoltre, consiglio di stampare a densità 100% la parte dedicata alla cerniera ed al gancetto di chiusura
18650 battery box for 2 places to safely carry 2 spare batteries in your pocket. It was printed with tolerances for a layer height of 0.2 and width of 0.44. It is molded in a single piece and the best way to feed it to the slicer is to place it on the flat side, adding the supports only where it has a hinge to fold. Furthermore, I recommend printing the part dedicated to the zipper and closing hook at 100% density