Replacement battery mount base for SuperShark ebike battery
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this part to replace part of the mount for a SuperShark eBike battery.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 586
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Most Mountain bikes nowadays have a curved downtube. As a result, an ebike battery such as the SuperShark battery (see pictures) cannot be attached as low as I want on my bike frame. Hopefully the pictures explain this.
The part I designed allows to lower the battery by another 3 or 4 centimeters because I added a curvature under the mount base.
The part replace the original one and uses the same original bolts and nuts, except for one of the bolt that needs be cut shorter to avoid touching your bike frame.
There are multiple cable exits as I also want to also power an external DC/DC converter.
Printed in 0.2 to keep details. At least two (or three) layers wall and 10% infill to keep this light.
You can find a few pictures side by side with the original part to compare.
[January 25th 2024] version 1.1 with better fit for the exit cables and other minor improvements