Midget Fidget
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minute fidget that only uses 3 grams of fillament
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 236
- Wydruki
- 3
- Wyświetlenia
- 1376
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed 3D Printy's version out but soon realized the tolerances are crazy small and inserting the magnets is near impossible and putting on the case was very hard in the end I decided to reverse engineer it to make it smoother.
Instructions
Print it out and pause it at layer 16 to insert the magnets and then let it print over, securing the magnets in place and stopping any unwanted collisions with the magnets. The magnets size is 8x3.
If you don't have any magnets you can just simply go with out them, it will be less satisfying but will still function just without the same satisfying click.
Although I designed it myself the design is heavily influence by 3D Printy's design so I'm not sure if I should make it a remix or not, if you know please let me know in the comments