1 / 1
Electrical plug cover-tethered REMIX of 3 Prong Plug
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Changed the tether slightly.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 335
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (13)Powiązane
Changes allow placement over plugs that did not fit through the original loop at the end of the tether. This was done as the loop did not fit over the plug for my diesel engine block heater.
Hat tip to Grant for the original model used for this remix.
Printed on Prusa MK3S+
Print Settings:
Supports: No
Infill 25% but recommend original Infill of 30%
Material: FilaFlex TPU 40A
Resolution: 0.2