Quest 3 magnetic Gunstock - compact and lightweight - Buttstock attaschment soon !
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quest 3 magnetic gunstock, customizable in lenght. Designed to fit (AMVR) Knuckle Straps and normal straps.
- Ocena
- 0 / 5
- Polubienia
- 51
- Pobrania
- 229
- Wydruki
- 1
- Wyświetlenia
- 2918
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
A Quest 3 Gunstock - adjustable in length - soon I will add a buttstock (work in progress). The front and back part are hold by a magnet and are easy to detach. The fits for the controller can be adjustet in lenght along the rail system.
I designed the controller mounts to fit (AMVR) knuckle straps. They also fit the original controller well.
I used one a 25mm (radius) x 7 mm (depth) magnet with 30kg of force. (Amazon: https://www.amazon.de/dp/B0C61QL9LD?ref=ppx_yo2ov_dt_b_product_details&th=1)
For the other side you can use a flat washer (25 - 30mm of diameter).
To fix the washer and the magnet you can either use glue or a screw (3,5x20mm for the washer).
I used 30 % infill (Gyroid), PLA. I printed with support.
The models have some tolerance for a clearance fit. 100 % should fit, but might be a bit tightly in the first time. Maybe scale the front and rear base to 100,5 % or 101%.
Print the Pins 2 times; one for the front and one for the rear are enough. You can print 2 more for a even more tight fit, but in my opinion thats not necessary.
The buttstock will be added soon (work in progress).
The pictures show my prototype. After printing I improved the model a bit.