1 / 6
Sumo XL Enclosure Front-End with Door Lips and Door Stopper — zdjęcie 1
1 / 6

Sumo XL Enclosure Front-End with Door Lips and Door Stopper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of the Sumo XL enclosure with added inserts behind the door. It also adds a door stopper on top.

Ocena
0 / 5
Polubienia
10
Pobrania
95
Wydruki
0
Wyświetlenia
873
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Revision History

1.0  - Initial Release

1.1 - Added the vertical slots on the left and right upper front pieces to adjust belt tension.

 

Description

This is a remix of the Sumo XL enclosure. Please see the original model for build instructions.

I took the original model and added a 5mm lip recessed 3mm back behind the doors. When the doors are closed, they rest up against this lip. This blocks drafts and gives the doors extra support. 

I also added an option for a top-side magnetic doorstop.

Finally, I added a 3rd hole for my 270 degree hinges (model here).

 

This model uses Ruthex M3x5x4 “Voron” Heat Set Inserts and the 6x3mm magnets included in the Sumo XL kit.

 

There are multiple variations of the “lips”.

  • Standard - Multiple Mounting Holes
  • Clean - Fewer Mounting Holes

Print the crossbeam_door_bracket_stl if you want a top-side magnet.

Tagi