Easy corner rail removal end cap for Milwaukee Packout drawers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacing stock end cap with this model allows for easy and fast corner rail removal
- Ocena
- 5 / 5
- Polubienia
- 92
- Pobrania
- 606
- Wydruki
- 1
- Wyświetlenia
- 3614
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacing stock Milwaukee Packout end caps with this model allows for easy and fast corner rail removal.
This model reuses the existing factory screw, and requires the addition of a M5 x 6mm allen socket cap screw per corner.
This will fit Packout model 48-22-8442 and likely fits 48-22-8443, 48-22-8444, 48-22-8447, and any other model with the same factory snap in end cap.
I suggest removing the stock end cap by first drilling the locking tab through the hole, then using a combination of flat screwdriver, punch, and a hammer to knock down any high edges before then sliding down the rail. This feels much safer than prying on the Packout to get the stock end cap out.
STL, STEP, and F3D files included.