University of Colorado Boulder Coaster - Multicolor / Multipart
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CU Boulder multipart / multicolor coaster. The design is set up for you to print pieces in different colors and then…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 55
- Wydruki
- 2
- Wyświetlenia
- 249
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
CU Boulder multipart / multicolor coaster. The design is set up for you to print pieces in different colors and then snap them together after printing. The bull horn prints with the base and thus would be the same color as the base.
I used 0.4mm clearances for the most part and it came out OK but the clearances could probably be made tighter. You can use a little bit of epoxy like liquid nails before you snap in the pieces to get everything to hold nicely if there is too much slop.
I am including the Fusion 360 file so you can modify as needed to get the best results on your printer.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
No
Supports:
No
0.2 mm
Infill:
15%
Filament:
Inland PLA+ White, Black, Silver
Category: Kitchen & Dining