Cougar QBX Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
40mm M3 stepped bolts with nuts on opposite (old motherboard standoffs and intel cooler bolts).
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
40mm M3 stepped bolts with nuts (old motherboard standoffs and intel cooler bolts) on opposite side. Non stepped bolts would probably work as well but I haven't tried.
I carefully glued the nuts on the other side then also use a 5mm screwdriver to hold them when attaching everything so it doesn't break the glue - glue isn't really needed but it just makes it easier as they stay in place.
Drilling through top of case and sliding top cover is required and needs to be quite accurate in order to get a good fit. It is very solid once everything is fitted well, I designed and installed these two years ago and have been using them several times a week to move the PC to living room and theater.
Print Settings
- Printer brand: Creality
- Printer: Ender 3 Pro
- Rafts: No
- Supports: No
- Resolution: 0.16
- Infill: 60% (or higher)
- Filament brand: 3D-Fuel
- Filament color: Charcoal Gray
- Filament material: PLA+
- Bed Temp: 65c
- Material Temp: 210c
- Notes: Would recommend printing a rough slice to get accurate drill hole positions sizes panel fitment and screw fitment. See photos.