Analog Voltmeter Clock 4.5mm Holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I realized after printing the original clock bodies that the holes to connect the bodies together are not present,…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
Voltmeter clock from this project: https://michaelteeuw.nl/post/what-time-is-it-fathers-day
I realized after printing the original clock bodies that the holes to connect the bodies together are not present, they come out as divots. When drilling out the holes, it became apparent that the bodies would not line up and the end result would be unsatisfactory. I also realized that the holes in the connectors were way too small for the 4mm screws I thought we were supposed to use.
I loaded all of the models into Fusion360 and made all the holes 4.5mm to match the size of holes on the face of the bodies where the gauges attach. Now all the hardware you need will be 4mm (except the rear covers were left as-is).
I have included the Fusion360 files so you can modify the hole sizes easily if you want to do something different.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
15%
Filament:
Atomic PLA Black
Category: Electronics