3D RGB DreamLight Case Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modified the case top and bottom to accommodate adding an electret microphone amplifier and a female barrel jack for…
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 846
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
I modified the case top and bottom to accommodate adding an electret microphone amplifier and a female barrel jack for power to the original design. All hardware is inside the case (Arduino Nano, a capacitor, a resistor, the microphone, and wiring. Used hot glue to hold everything together and M3-0.5 x 6mm cap screws to secure the base.
I also used a quick disconnect plug for power to the Nano so I can program it from USB if I need to while keeping the LED matrix powered.
I am including the code I wrote to control the LEDs. I wrote in about a half dozen variations for how the matrix will light up. My code isn't commented very well but there isn't much there so shouldn't be difficult to figure out. Also has some code in it from Adafruit to measure sound levels.
SOURCE CODE:
https://pastebin.com/E13bxYhh
Audio to A1 and LED data to D3
PARTS:
- Electret Microphone Amplifier - MAX4466 with Adjustable Gain
https://www.adafruit.com/product/1063 - 3A 12v For DC Power Supply Jack Socket Female Panel Mount Connector 5.5mm 2.1mm Plug Adapter 2 Terminal Types 5.5*2.1
https://www.aliexpress.com/item/10Pcs-3A-12v-For-DC-Power-Supply-Jack-Socket-Female-Panel-Mount-Connector-5-5mm-2/32883658107.html - 1000uF 25V Radial Electrolytic Capacitor 10 x 17mm 105°C
https://www.banggood.com/20pcs-1000uF-25V-Radial-Electrolytic-Capacitor-10-x-17mm-105C-p-1022623.html - Through-Hole Resistors - 470 ohm 5% 1/4W
https://www.adafruit.com/product/2781 - 2-pin JST SM Plug + Receptacle Cable Set
https://www.adafruit.com/product/2880 - M3-0.5 x 6mm cap screws
https://www.homedepot.com/p/Everbilt-M3-0-5-x-6-mm-Zinc-Plated-Plain-Metric-Socket-Cap-Screw-3-Piece-per-Bag-803168/204808021 - Arduino Nano
https://www.aliexpress.com/item/Newest-1-pcs-Nano-V3-0-ATmega328P-Module-Board-Free-Mini-USB-Cable-for-Arduino-Compatible/32961269354.html - 8x8 RGB LED matrix
https://www.banggood.com/CJMCU-64-Bit-WS2812-5050-RGB-LED-Driver-Development-Board-p-981678.htmlPrint Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
20%
Filament: Inland PLA+ White and Black
Category: Art