One piece spool roller with bearing provision
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One piece roller with bearing provision
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
REMIX OF https://www.thingiverse.com/thing:2479238
Tested in Cura, doesn't slice properly in Simplify 3D due to my lack of skill in creating models.
Work was done in Meshmixer and exported to STL. I took the existing female roller and cut the bottom off just past the provision for the bearing and duplicated it to make the other end and then put in a cylinder in between to make a one-piece roller with provisions for bearings. Confirmed that everything fits as expected.
Overall length of the one piece roller is twice the length of the female half of the original roller.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
**Rafts:** No
Supports:
No
**Resolution:** 0.2mm
Infill:
20%
Post-Printing =============
Rollers being printed
Category: 3D Printer Accessories