Fackelmann Electric Pepper Mill / Stanley Rogers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement of the 6 AAA battery by Lipo cell
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This electric pepper mill works well, but consumes all 6 batteries (4 AAA indicated on the label :) )at the speed of light, and the motor torque is too low because the battery voltage drops rapidly. I had the misfortune of leaving relatively flat batteries (Duracell eg Duraleak:/ ) in the mill and they leak inside.
All this modification fits into the original housing.
So I upgrade them with printed parts, LiPo battery and a few components:
- 1 Lipo 4.2v battery 32x30x4 mm (protection board must be removed) https://s.click.aliexpress.com/e/_DkvuQTf
- 1 Lipo 4.2v usb-c charger IP2312
https://s.click.aliexpress.com/e/_Dk0tDYV
- 1 step-up converter 3.7v -> 9V MT3608
https://s.click.aliexpress.com/e/_DBs4Kwz
- 1 Tactile Push Button 6x6x4.3mm
https://s.click.aliexpress.com/e/_DBT5w65
The assembly is wired and housed in the module as shown in the photo.
an optional 1000µF 16V capacitor help the motor regarding his torque.
The capacitor is located under the step up board
Original screws are used and some glue
Happy milling !