1 / 4
Galileo 2 extruder with two sensors - before and after extruder for ERCF
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Galileo 2 extruder with two sensors - before and after extruder for ERCF
- Ocena
- 0 / 5
- Polubienia
- 73
- Pobrania
- 330
- Wydruki
- 0
- Wyświetlenia
- 3465
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 6)Remiksy (1)Kolekcje (134)Powiązane
NOT TESTED, WAITING FOR PARTS !! ONLY FOR TESTING !!
now I'm editing for Filametrix mod…
Sensor before extruder - only click
Sensor after extruder - screwed
For assembly:
2x sensor D2F-5
2x ball 5,5mm
2x tapping screw M2x10