Screw Tray labelable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Screw Tray for sorting and storing screws while repairing a device, with space to label the screws.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 158
- Wydruki
- 1
- Wyświetlenia
- 654
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A Screw Tray for sorting and storing screws while repairing a device, with space to label the screws.
You can write on the top surface with an non-permanent marker and easily wash it away with water. The top layer needs a good printing quality for this. I printed it with a MK4 in PETG with standard 0.2 speed settings, and it came out nice. If You have trouble with a good top layer, ironing might help.
The labelable parts on the top are 10mm high, so they also fit 9mm labeling-tape from labelprinters (e.g. Dymo, Brother). You can glue them to the parts and then write on them with a marker, for a perfect surface to write on.
(Two colours in the picture because I ran out of the darker one. Actually a colour change after the flat part may look really nice, have a try! Don't use too dark filament at the top, so You can write on it with a black or blue marker.)
*labelable is my new favorite word