1 / 6
MK3S+ Chimney Cover LED-Mod for MMU2S or MMU3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small mod to have visual feedback from the filament sensor. It uses an SMD LED and a resistor.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane

I used a small white SMD LED that I had lying around and a 1k2 resistor.
The resistor is soldered to the +5V pin and the LED with the cathode to the OUT pin. A small bridge with a piece of wire must then be soldered between the resistor and the LED anode.

happy printing and please post a make, i would really appreciate it :)