1 / 3
Felix GT2 2mm Idler for X-Axis (624 Bearing) — zdjęcie 1
1 / 3

Felix GT2 2mm Idler for X-Axis (624 Bearing)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is based on the 608ZZ GT2 Idler but has been modified for the Felix Printer X-Axis Idler Bearing which is 624…

Ocena
0 / 5
Polubienia
3
Pobrania
49
Wydruki
0
Wyświetlenia
225
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is based on the 608ZZ GT2 Idler but has been modified for the Felix Printer X-Axis Idler Bearing which is 624 bearing. the SCAD file should be easily modified to print one to suit the original Felix 3M belt.

Original 608ZZ Design here:
http://www.thingiverse.com/thing:82490

Instructions

When installing on the Felix only the bearing is required, no other washers on the inside are required.

Category: 3D Printer Parts

Tagi