Triforce Spinner Keychain and Earring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stylized wingcrest from the Legend of Zelda with spinning triforce; both keychain- and earring- sized designs.
- Ocena
- 0 / 5
- Polubienia
- 51
- Pobrania
- 189
- Wydruki
- 0
- Wyświetlenia
- 491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A Legend of Zelda inspired pair of designs, with a gyro-style spinning triforce inside a stylized wingcrest. There are two main designs: an earring that's as small as I could make it with a spinning triforce, and a larger version that's for keychains, zipper pulls, or any other use you can think of.
I've also included a version of the larger design with a smaller loop for earring findings, and versions of both with wide loops that would fit more of a ribbon shape.
(Still in the works: A similar larger model meant to be a little desk decoration.)
How to Print:
- PLA
- designed for PLA but as always, feel free to test other materials
- Print in place
- No supports
- 0.2mm layer height, or 0.1mm layer height for a finer print (test prints and photos are of 0.2mm layer height)
- 0.4mm line width
- Good bed adhesion for little details on the first layer
- 50% infill (cubic recommended)
Why this one is noncommercial: I'd make it otherwise but it's fanart of a franchise I own no part of. Alas.