1 / 4
Bambulab  P1S | P1P | X1C | X1E Piggybank Big — zdjęcie 1
1 / 4

Bambulab P1S | P1P | X1C | X1E Piggybank Big

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bambulab Piggybank Big too store your hard earned money

Ocena
0 / 5
Polubienia
11
Pobrania
60
Wydruki
0
Wyświetlenia
640
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

This is a 156x156x184mm (WxLxH) piggy bank that is moddeled after the BambuLab X1Carbon CoreXY 3D Printer. This is about a 1:3 scale down from the original printer.

The Idea comes from jpbruce, but this is my Version of an Bambulab Piggybank.
 

Only the Door needs support, everything else is Printable without support.

You need besites the 3d Printed parts:

9x M3x6 Hex Socket Screws

9x M3 heat insert

opt. 2x round Magnets 6x3 for locking the door

Assembly

  1.  Shrink in all the heat inserts in the holes.
  1.  Screw on the display to the big main body
  2.  Screw on the knop to the Door, optional you can glue a magnet in the hole which is left in the door. Also in the floor is a hole for a magnet, but be carefull with the oriantation.
  3.  Stick the door in the hole in the main body so it can swing freely
  4.  Stick the floor on the doorpin an allign with the holes from the main body and screw them together.
  5. Throw in your hard earned money

 

Tagi