45 Degrees LED bar clip mount for 2020 extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for LED bar for 2020 extrusion
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 728
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought this LED bar -→ https://www.aliexpress.com/item/1005005787406587.html?spm=a2g0o.order_list.order_list_main.83.557018021ViiJB.
This LED bar can actually go straight into the cavity of the 2020 extrusion, but that would make it pointing straight forward. I wanted it to point 45 degrees downward to give it a better lighting, but couldn't find a good one, so I designed one.
Printed 2 just to hold both end, but feel free to print 3 for the middle if you think you need one for bigger printer.
I printed with PETG to give it a bit more flex for the clip to go on the extrusion