1 / 6
Neopixel led round around rpi camera for articulated arm — zdjęcie 1
1 / 6

Neopixel led round around rpi camera for articulated arm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wanted a steady articulated arm mounted with raspberryPI camera and adding to it a neopixel led circle

Ocena
0 / 5
Polubienia
5
Pobrania
24
Wydruki
0
Wyświetlenia
341
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My articulated arm is mounted to wall, so I wanted a version that would be almost solid mounted for camera+led strip. LED strip is from a ESP01s led pixel(picture included). So print one part and same part again, but mirrored. I added a freecad file, just in case someone decide, that he can do it better.
 

Used:
2x screws at least 2cm and nuts
raspberry camera
led round strip used from ESP01s from aliexpress, changed cables


Note: As leds can be hot, I used PETG for it. My printer is not really much calibrated, so there is high tolerance when printing (0,6 nozzle, used 3,5 with input shaperd)

Tagi