1 / 5
Clip-on Printrbot brushless blower turbine fan mount — zdjęcie 1
1 / 5

Clip-on Printrbot brushless blower turbine fan mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a clip-on mount for attaching a brushless blower fan to a Printrbot+ extruder. Assuming the extruder…

Ocena
0 / 5
Polubienia
1
Pobrania
16
Wydruki
0
Wyświetlenia
193
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

This is a clip-on mount for attaching a brushless blower fan to a Printrbot+ extruder. Assuming the extruder dimensions are constant, this will likely work for all Printrbots with laser-cut wooden extruders.

It was designed to work with a 5015S blower fan purchased from eBay for $4.89, which is 50mmx15mm high, runs at 3800rpm, and puts out 20CFM. It runs circles around the 40mm PC fans I'd tried previously to use to cool filament.

In the photo, it looks as though the bottom edge of the blower is lower than the tip of the extruder nozzle, but that's due to the angle at which the photo was taken. The bottom edge of the fan housing is at least 1mm higher than the end of the nozzle, which is plenty.

Instructions

Here are the more interesting settings I used, which worked fine:

.35mm extruder nozzle

3mm black PLA plastic

Slic3r settings:

overhang threshold: 60º

Pattern: honeycomb

Pattern spacing: 40mm

Pattern angle: 0º

infill:

Fill density: .1

Fill pattern: rectilinear

Top/bottom fill pattern: concentric

Infill every: 2 layers

Fill angle: 45º

I printed using Repetier-Host Mac 0.53, and had to rotate the object 90º on its X axis in order to place it flat on the print bed.

This mount takes inspiration from http://www.thingiverse.com/thing:29565, but aims to be more minimal. I designed the mount such that it holds itself in place using friction and also has little arms that poke through holes in the sides of the extruder platform and extend to its back to provide even more support for the weight of the fan. If you print this in PLA, the object may be too brittle to bend enough to fit both arms into the holes, and one may snap. This happened to me, and I just glued it together in-place using a drop of cyanoacrylate. It'll likely hold in place without those arms, but they provide just a little more support.

This is my first attempt at a semi-complicated CAD project, and I expect many of you who might benefit from such a mount can probably improve upon this design and make a nice derivative. So in addition to the printable STL file, I've uploaded the original .f3d file (object was designed in Autodesk Inventor Fusion), and an exported STP file.

Here's the link to the blower fan I'm using: http://www.ebay.com/itm/1-PCS-12V-DC-50MM-x-15MM-Turbine-Brushless-Cooling-Blower-Fan-5015S-12V-0-1A-/221041441726?ssPageName=ADME:L:OU:US:3160

Category: 3D Printer Accessories

Tagi