ZSA Moonlander extended leg (76mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an extended leg for the moonlander that allows you to tent the keyboard higher than stock.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is an extended leg for the moonlander that allows you to tent the keyboard higher than stock. The leg has been ergonomically designed to allow you to stow the leg into the storage position for transportation.
You can also achieve similar height as the stock legs by locking the legs at an angle and this would be much more stable than the stock legs, and you can then lock the thumb cluster at your desired angle without having to worry about stability.
Note that on the first use, tighten the screws much harder than you normally would to force an imprint of the ridges on the plastic. This would allow you to be able to lock the legs at the stepped angles thereafter.
The .stl included is for the left leg. Mirror the print in your slicer for the right leg!
If you want to tent the keyboard at the maximum height, or for extra stability, then also check out my thumb cluster telescopic support legs at https://www.thingiverse.com/thing:5152420.
Category: Other